Some Major alarms

[pjazz]

I have a CS1000 7.5 I opt 81 with 6 columns. I've started to get these messages and can't get them to stop. I can't even login because too many messages are being generated. I looks like it has to do with power. Could some one point me in the right direction?

FPEC 11
LINK: PRIMARY
CV ES SES PSC
17:00-17:15 00000000 00000000 00000000 00000000
17:15-17:30 00000000 00000000 00000000 00000000
17:30-17:45 00000000 00000000 00000000 00000000
17:45-18:00 00000000 00000000 00000000 00000000
CURRENT 1/4 HOUR 00000000 00000000 00000000 00000000
CURRENT DAY 00000000 00000000 00000000 00000000
PREVIOUS DAY 00000000 00000000 00000000 00000000
LINK: SECONDARY UNEQUIPPED


evtCollSendEvent(): enqueue PWR3 failed, queue full


evtCollSendEvent(): enqueue PWR12 failed, queue full


evtCollSendEvent(): enqueue PWR52 failed, queue full


evtCollSendEvent(): enqueue PWR12 failed, queue full


evtCollSendEvent(): enqueue PWR52 failed, queue full


evtCollSendEvent(): enqueue PWR12 failed, queue full


evtCollSendEvent(): enqueue PWR52 failed, queue full


evtCollSendEvent(): enqueue PWR12 failed, queue full


evtCollSendEvent(): enqueue PWR52 failed, queue full


evtCollSendEvent(): enqueue PWR12 failed, queue full

*** PWR012 11/07/16 17:56:08 4484076


evtCollSendEvent(): enqueue PWR52 failed, queue full


evtCollSendEvent(): enqueue PWR12 failed, queue full

OPRDATA: UPSA 05 0 0

* PWR052 11/07/16 17:56:08 4484077


evtCollSendEvent(): enqueue PWR12 failed, queue full


evtCollSendEvent(): enqueue PWR52 failed, queue full


evtCollSendEvent(): enqueue PWR0 failed, queue full


evtCollSendEvent(): enqueue PWR0 failed, queue full

OPRDATA: UPSA 05 0 0

*** PWR012 11/07/16 17:56:09 4484080

PRPM 60
DATE: 07/11/2016 TIME: 18:05:42
FNET 60
LINK: PRIMARY
CV ES SES PSC
17:00-17:15 00000000 00000000 00000000 00000000
17:15-17:30 00000000 00000000 00000000 00000000
17:30-17:45 00000000 00000000 00000000 00000000
17:45-18:00 00000000 00000000 00000000 00000000
CURRENT 1/4 HOUR 00000000 00000000 00000000 00000000
CURRENT DAY 00000000 00000000 00000000 00000000
PREVIOUS DAY 00000000 00000000 00000000 00000000
LINK: SECONDARY UNEQUIPPED
FPEC 11
LINK: PRIMARY
CV ES SES PSC
17:00-17:15 00000000 00000000 00000000 00000000
17:15-17:30 00000000 00000000 00000000 00000000
17:30-17:45 00000000 00000000 00000000 00000000
17:45-18:00 00000000 00000000 00000000 00000000
CURRENT 1/4 HOUR 00000000 00000000 00000000 00000000
CURRENT DAY 00000000 00000000 00000000 00000000
PREVIOUS DAY 00000000 00000000 00000000 00000000
LINK: SECONDARY UNEQUIPPED


evtCollSendEvent(): enqueue PWR0 failed, queue full


evtCollSendEvent(): enqueue OVL305 failed, queue full


PRPM 60

 

[Firebird Scrambler]

From looking at the details you have given, it appears that the problem lies with your UPS as the alarm PWR052 shows

For PWR052 UPSA: Uninterruptible Power Supply (UPS) alarm condition 2
has been cleared. For PWR050 DCSP: DC alarm is OFF.

Severity: Minor

It might be an idea to look at the UPS first.


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support

http://www.linkedin.com/in/davidbromley

 

[Wanebo]

The other error code was PWR012

PWR0012 hw
For PWR012 UPSA: Uninterruptible Power Supply (UPS) Summary alarm
(condition 2). The meaning depends on the UPS manufacturer. Best Inc.
UPS Summary alarm is ON Lorain UPS bypass is ON Exide UPS bypass is
ON Alpha UPS low battery For PWR012 DCSP: DC alarm is ON.

Severity: Critical

Looks like that alarm means something different depending on the manufacturer of the UPS.

 

[bad69cat]

I would check the battery voltage while looking things over...... make sure it's with tollerances

 

[KCFLHRC]

You can always disconnect the cable from the System Monitor that goes to the UPS and see if the trouble clears.

 

[pjazz]

Guy I work with was able to switch cores through all of the garbage. Cores were actually spilt.Synced them back up.