Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Solaris Not Seeing Lun

Status
Not open for further replies.
alitaz

alitaz

Technical User
Jan 30, 2003
13
US
Connecting a Solaris box with an Emulex 9002L HBA to a Brocade 3800. Storage is a EMC 4500. Edited the sd.conf to include the target for the Lun and re-booted. Solaris does not see the lun. Zoning is correct. Any suggestions.
 
Sort by date Sort by votes
Does your 4500 use Lun Masking?

Go to the /usr/sbin/lpfc directory and run the lputil. It is best practice to setup persistant binding.
 
Upvote 0 Downvote
Yes - we are using Lun Masking and have run the lputil, but still no luck - any advice.
 
Upvote 0 Downvote
We did the same setup for a Windows 2k box and it picked the storage up after a reboot.
 
Upvote 0 Downvote
Could you post or send me a copy of your sd.conf and your lpfc.conf files.

comtec17@carolina.rr.com
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Nyas
  • Locked
  • Question
How to find a VMs (VMware, or Hyper-V) connected to which LUN. ?
Replies
0
Views
221
Nyas
Nyas
rightmirem
  • Locked
  • Question
Supermicro SMC2208 not recognizing replacement OS drive
Replies
0
Views
235
rightmirem
rightmirem
vjayraghavan
  • Locked
  • Question
IBM SVC -- VM 5.5 -- LUN Disconnect and PSOD's
Replies
0
Views
134
vjayraghavan
vjayraghavan
jakob314
  • Locked
  • Question
MSL6030 tape not unloading
Replies
3
Views
87
jakob314
jakob314
winsys20
  • Locked
  • Question
LSI MegaRAID SAS 9260-4i beeping, Server will not boot into OS now
Replies
1
Views
150
technome
technome

Part and Inventory Search

Sponsor

Back
Top