Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Linux software RAID provides redundancy across partitions and hard disks, but it tends to be slower and less reliable than RAID provided by a hardware-based RAID disk controller.
Hardware RAID configuration is usually done via the system BIOS when the server boots up, and once configured, it is absolutely transparent to Linux. Unlike software RAID, hardware RAID requires entire disks to be dedicated to the purpose and when combined with the fact that it usually requires faster SCSI hard disks and an additional controller card, it tends to be expensive.
Remember to take these factors into consideration when determining the right solution for your needs and research the topic thoroughly before proceeding. Weighing cost versus reliability is always a difficult choice in systems administration.