Software needed for CICS Cabinet

[desertinn]

I have two older cabinets that do not have SW in them. They are labled:

NORSTAR PLUS COMPACT ICS

I need to be able to to use all 8 lines with CID and to be able to display the CID info when the lines rings and before they are answered they will have APPEAR & RING ( I believe all versions of CICS will do this )

Also, I need all 16 extensions and the ability to use the Auto Attendant / CCr feature.

I know that some SW versions will not work with some cabinets. I found the following card available:

Nortel 10.7 Flash Norstar CICS DR2 ( 4 x 8 ) Software Card

Will this work if not what versions will work?

 

[phoneguy427]

The 4x8 software is restricted to 4 lines and 8 sets. You need standard 4.1 sip or better to get the aa prompts and 8x16 capacity.

 

[silver987]

Try these guys, they have s/w only at pretty good prices.

http://norstarsource.com/

Wayne T

 

[exsmogger]

I might have some spare software laying around the office.

Brian Cox
Oregon Phone

http://www.OregonPhone.com

 

[desertinn]

Thanks. Let me know what you want for the software I am also looking for a good price on new or used T7316e's. I need about 30 for restocking.

i am going to place an other post regarding a good source for the T7316es but if you guys know of a reliable source please let me know.

Thank you

 

[exsmogger]

Can't discuss pricing on the forum.

Brian Cox
Oregon Phone

http://www.OregonPhone.com

 

[desertinn]

I understand. I will contact you on your website. Thank you

 

[HughRunyan]

contact

http://www.allnt.com/

had some good prices on old m phone

 

[desertinn]

Thanks. They look like a good source.

 

[desertinn]

I found a card with the following markings:

# A0500011 2003/11/03
# NT7B66CF Rel01 0003
# CICS-SP 6.1 FC

Can this be used?