Software Install on new MxeIII

[loopretnav]

I am installing software on a new system and the below is what I get. Software MCD 4.2



boot device : qefcc
unit number : 0
processor number : 0
host name : bootHost
file name : Boot_Install
inet on ethernet (e) : 192.168.1.2:ffffff00
host inet (h) : 192.168.1.5
gateway inet (g) : 192.168.1.1
user (u) : ftp
ftp password (pw) : ftp
flags (f) : 0x0
other (o) : FixPartition

Attached TCP/IP interface to qefcc0.
Attaching network interface lo0... done.
Loading... 8180080
Starting at 0x10000...

-> 0x1f7ffe00 (tRootTask): Warning: Task name tRootTask just change directory (c
d) to /sysro

Last reset cause was (0x80) POWER_ON_RESET
Creating block device for controller 0 drive 0...

 

[loopretnav]

I had HD in HD2 slot instead of HD1 slot. Software loaded.