Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Andrzejek on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Software for board IS 3000 and call@net
- Thread starter Lele22
- Start date
- Thread starter
- #3
Yesm I have management software and ftp access. I dont have a manual or software for upgrade a DTX-I, PMC,another question I enable a managemnt ip and see if i call in tcp on port 2598 recive a ex 98000 where the first zero is a major allarm the second zero is a minor and the last a blocked...you know software for masnagement allarm
I work with a SMPC 5.0.....
I work with a SMPC 5.0.....
SMPC contains simple alarming but its not very usefull.
Management@net contains more alarm logging possibilities.
You can check alarms in the terminal screen with commands dimaja,dimina,disila
What cpu software do you have (diexid)
What board packages do you have (dipack)
What problem or feature do you need an update for.
Management@net contains more alarm logging possibilities.
You can check alarms in the terminal screen with commands dimaja,dimina,disila
What cpu software do you have (diexid)
What board packages do you have (dipack)
What problem or feature do you need an update for.
- Thread starter
- #5
Ok i try with a simple alarming...but not have a license..
I want upgrade a system because want have my switch with the last packet
I have a 810.29 CPU
PMC 1410.09.01
DTX 2203.13.02
the perfect situation for the allarm I belive you can have with Management@net you say were I can find this programm?
I want upgrade a system because want have my switch with the last packet
I have a 810.29 CPU
PMC 1410.09.01
DTX 2203.13.02
the perfect situation for the allarm I belive you can have with Management@net you say were I can find this programm?
- Status
Similar threads
