softphone with bcm 50 3.0 1

[ewick777]

why don t connect ip softphone


echec autorisation
retry 30 sec

SI VOUS PARLER LE FRANCAIS,REPONDEZ-MOI EN FRANCAIS,SI CELA VOUS LE DIT. MERCI
ERIC L. NCSS, NCTS

 

[SupportDude]

Is there an IP client seat available?
Have you double checked the configuration of the soft phone for port etc.?
Is registration enabled on the System?

-SD-

http://www.mysupportguy.net

 

[telcodog]

Is your BCM50 a release 3 or is the softphone a version 3.0? It is my understanding that version 3.0 softphone does not work with the BCM, only the CS1000.

 

[telcodog]

Here's part of the Nortel bulletin regarding the version 3.0 2050 softphone

Introduction
Nortel* is pleased to announce the general availability of Release 3.0 for the IP Softphone
2050.

Release 3.0 of the IP Softphone 2050 delivers new functionality and enhancements
including enhanced security with both signaling and media encryption, expanded wired and
wireless headsets, intra-office mobility with Bluetooth and long range wireless headsets,
click to call from TAPI applications, automated screen pops for incoming calls, scalability
with soft expansion modules, expanded language support, and 30 day try and buy with
software licensing.

IP Softphone 2050 Release 3.0, with its initial general availability, is supported on Nortel
Communication Server 1000 Release 3.0 and later. IP Softphone Release 1.0 and Release
2.0 will continue to be available for other Nortel Communication Servers where support is
offered for the Release 1.0 and Release 2.0 client today. Consult your Nortel representative
for further details on support plans for other Nortel Communication Servers with IP

 

[ewick777]

yes all config its ok
install anotjer computer thats ok
reinstall this computer
same things
echec de l autorisation



SI VOUS PARLER LE FRANCAIS,REPONDEZ-MOI EN FRANCAIS,SI CELA VOUS LE DIT. MERCI
ERIC L. NCSS, NCTS

 

[ewick777]

ok in english on the soft phone is written licensing failure
and its posible to install a other computer

SI VOUS PARLER LE FRANCAIS,REPONDEZ-MOI EN FRANCAIS,SI CELA VOUS LE DIT. MERCI
ERIC L. NCSS, NCTS

 

[gwebster]

licensing failure" indicates that you are trying to use release 3 of the IP Softphone 2050. You need a separate "licencing server" with release 3. It is not supported on BCM.

 

[ewick777]

why I am able to install the same software on another PC and it works

SI VOUS PARLER LE FRANCAIS,REPONDEZ-MOI EN FRANCAIS,SI CELA VOUS LE DIT. MERCI
ERIC L. NCSS, NCTS

 

[gwebster]

Once installed on a PC, the IP Softphone 2050v3 will run for up to 30 days without receiving a "licence" from the "licence server" and then will stop working.

Following the logic above, if you then install the software on a different PC, it will work on the new PC for another 30 days without receiving a "licence".

 

[ewick777]

ok then I have to buy the softphone with a thank you liscence

Si vous parlez le francais,répodez-moi en francais,Merci Eric L. NCSS, NCTS

 

[BrainWreck]

ouch. I thought it was free. where can you find how much longer you have before expiration?

 

[ewick777]

I've download a free version on the site and install nortel for over one month

Si vous parlez le francais,répondez-moi en francais,Merci Eric L. NCSS, NCTS

 

[ewick777]

after 30 days failure license

Si vous parlez le francais,répondez-moi en francais,Merci Eric L. NCSS, NCTS