So close I can taste it..... 4

[MagnaRGP]

Howdy all. Seems to be a lot of NARS questions floating around, and I am no exception. This is related to one of my previous threads which you all helped with, but I'm missing the final piece of the puzzle.

CS1kE 5.0 SA split between 2 NPAs (416 and 905). Some NXXs in 905 are local to 416, but not 905 (example 905-686-aaaa).

Users in 416 should be able to dial 9,905-686-aaaa and the call will pass, 905 users would get a telco intercept. So, I've managed to modify the RLI successfuly as follows:

RLI 9
ENTR 0
LTER NO
ROUT 9
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 1
DMI 0
FCI 1
FSNI 0
SBOC NRR
CBQ YES

ENTR 1
LTER NO
ROUT 10
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 1
DMI 0
FCI 2
FSNI 0
SBOC NRR
CBQ YES

ENTR 2
LTER NO
ROUT 9
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 1
DMI 0
FCI 0
FSNI 0
SBOC NRR
CBQ NO

ISET 3
NALT 5
MFRL 1
OVLL 0

Where rt 9 = 905 site PSTN and rt 10 = 416 site PSTN, FCAS 1 denys NXXs (including 686) and FCAS 2 allows those same NXXs. It works fine. BUT.....

I don't want the users in 905 to change their dial pattern, so I need to accommodate dialing for 9-1-905-686-aaaa such that it will recognize the NXX, deny the call on rt 9 (initially), strip the 1 (DMI 30 = del 1) attempt the call on rt 10 as above and if ATB, place the call on rt 9 giving authcode stutter tone (FRL 2 = stutter tone).

I've mucked about with it for a while now, and despite wearing a hard-hat (this is a construction site) I have a headache from beating my head on the wall.

Heeeeellllp. (please)

Thanks.

 

[acewarlock]

Quote:
"strip the 1 (by use of DMI 30)"


There isn't any DMI 30 listed in RLI 9, ENTR 0 or 1, so there isn't any stripping of the 1.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[MagnaRGP]

Right you are ace. As originally stated:
"Some NXXs in 905 are local to 416, but not 905 (example 905-686-aaaa).

Users in 416 should be able to dial 9,905-686-aaaa and the call will pass, 905 users would get a telco intercept. So, I've managed to modify the RLI successfuly as follows".

Therefore, RLI 9 was listed as an example of a successful RLI. 9 is NOT the one I'm trying to now create. Follows is the pertinent info for 9-1-905. Remember, in the following posts FCAS 1 denys 905-686, FCAS 2 allows 905-686:


NPA 1905
RLI 1
DENY 976

SDRR DENY CODES = 1
ITEI NONE

DMI 30
DEL 1
ISPN NO
CTYP NCHG

RLI 1
ENTR 0
LTER NO
ROUT 9
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 2
DMI 0
FCI 0
FSNI 0
SBOC NRR
CBQ YES

ENTR 1
LTER NO
ROUT 10
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 2
DMI 0
FCI 0
FSNI 0
SBOC NRR
CBQ YES

ISET 2
NALT 5
MFRL 2
OVLL 0

Now, here is what I have attempted, and had fail:

RLI 19
ENTR 0
LTER NO
ROUT 10
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 1
DMI 30
FCI 1 <--- allow 905-686
FSNI 0
SBOC NRR
CBQ NO

ENTR 1
LTER NO
ROUT 9
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 2
DMI 0
FCI 0
FSNI 0
SBOC NRR
CBQ NO

ISET 2
NALT 5
MFRL 1
OVLL 0


On top of this, I have tried:

a) entr 0 rt 9 fci 1 frl 1, entr 1 rt 10 fci 2 frl 1, dmi 30
b) same as a but MFRL 2

Here's the NCTL and my test set:

REQ prt
CUST 0
FEAT nctl
NRNG 0 7

SCBQ YES
CBTL 10

NCOS 0

EQA NO
FRL 0
RWTA NO
CBQ NO
SPRI 0
MPRI 0
PROM 0

NCOS 1

EQA NO
FRL 1
RWTA NO
CBQ YES
ROUT I
RADT 0
SPRI 0
MPRI 0
PROM 0

NCOS 2

EQA NO
FRL 2
RWTA NO
CBQ YES
ROUT I
RADT 0
SPRI 0
MPRI 0
PROM 0

NCOS 3

EQA NO
FRL 3
RWTA NO
CBQ YES
ROUT A
RADT 1
SPRI 0
MPRI 0
PROM 0

NCOS 4

EQA NO
FRL 0
RWTA NO
CBQ NO
SPRI 0
MPRI 0
PROM 0

NCOS 5

EQA NO
FRL 0
RWTA NO
CBQ NO
SPRI 0
MPRI 0
PROM 0

NCOS 6

EQA NO
FRL 0
RWTA NO
CBQ NO
SPRI 0
MPRI 0
PROM 0

NCOS 7

EQA NO
FRL 0
RWTA NO
CBQ NO
SPRI 0
MPRI 0
PROM 0

TOHQ NONE

DES 2002
TN 100 1 01 31 VIRTUAL
TYPE 2002P2
CDEN 8D
CTYP XDLC
CUST 0
NUID
NHTN
CFG_ZONE 002
CUR_ZONE 002
ERL 4161
ECL 0
FDN
TGAR 1
LDN NO
NCOS 1
SGRP 0
RNPG 20
SCI 0
SSU
LNRS 16
XLST 0
SCPW
CLS CTD FBD WTA LPR PUA MTD FNA HTD TDD HFD CRPA
MWD LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNIA CDCA MSID DAPD BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUA DPUA DNDA CFXD ARHD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDD EXR0
USMD USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC MCBN
VOLA VOUD CDMR ICRD MCDD T87D KEM2 MSNV FRA PKCH
CPND_LANG ENG
RCO 0
HUNT
PLEV 02
DANI NO
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
MLNG ENG
DNDR 0
KEY 00 MCR 3242 1 MARP
CPND
NAME Dining Area Clinic 6
XPLN 27
DISPLAY_FMT FIRST,LAST
01 MCR 3242 1
CPND
NAME Dining Area Clinic 6
XPLN 27
DISPLAY_FMT FIRST,LAST
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17 TRN
18 AO6
19 CFW 4
20 RGA
21 PRK
22 RNP
23
24 PRS
25 CHG
26 CPN
27
28
29
30
31
DATE 24 MAR 2008

So to sum up:

using RLI 1 for NPA 1905 -- dial 9-1-905-686-aaaa receive authcode prompt -- ok

using the various permutations of RLI 19 -- calls to 9-1-905-686
calls will fail in some form. When I get to customer site, I'll document each change, test and post the results.

This one is a puzzler.

 

[MagnaRGP]

Here is my first test today. I'll post each one individually to keep post length down and give you guys a chance to digest and maybe solve the puzzler for me between tests.


Test parameters:

NPA 1905
RLI 1
DENY 976

SDRR DENY CODES = 1
ITEI NONE


Numbers:
9-1905686aaaa -- LD on rt 9, local on rt 10
9-1905335bbbb -- LD on both rt 9 and 10

Test phone:

DES I2002
TN 096 0 01 06 VIRTUAL
TYPE 2002P2
CDEN 8D
CTYP XDLC
CUST 0
NUID
NHTN
CFG_ZONE 001
CUR_ZONE 001
ERL 9051
ECL 0
FDN 7000
TGAR 1
LDN NO
NCOS 1 <--- NCOS 1 = FRL 1
SGRP 0
RNPG 0
SCI 0
SSU
LNRS 16
XLST 0
SCPW
CLS CTD FBA WTA LPR MTD FNA HTD TDD HFD CRPA
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPD BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUD DPUD DNDA CFXD ARHD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDD EXR0
USMD USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC MCBN
VOLD VOUD CDMR ICRD MCDD T87D KEM2 MSNV FRA PKCH
CPND_LANG ENG
RCO 0
HUNT
PLEV 02
DANI NO
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
MLNG ENG
DNDR 0
KEY 00 MCR 2444 1 MARP
CPND
NAME IT Room
XPLN 27
DISPLAY_FMT FIRST,LAST
01 MCR 2444 0
CPND
NAME IT Room
XPLN 27
DISPLAY_FMT FIRST,LAST
Rest of keys irrelavent

Test 1: Benchmark

RLI 1
ENTR 0
LTER NO
ROUT 9
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 2
DMI 0
FCI 0
FSNI 0
SBOC NRR
CBQ YES

ENTR 1
LTER NO
ROUT 10
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 2
DMI 0
FCI 0
FSNI 0
SBOC NRR
CBQ YES

ISET 2
NALT 5
MFRL 2
OVLL 0

Dial 9,1905686aaaa

result: authcode prompt. Correct.

Dial 9,1905335bbbb

result: authcode prompt. Correct.

Test 2: Activate RLI 19 on NPA 1905

RLI 19
ENTR 0
LTER NO
ROUT 10
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 1
DMI 30
FCI 2
FSNI 0
SBOC NRR
CBQ NO

ENTR 1
LTER NO
ROUT 9
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 2
DMI 0
FCI 0
FSNI 0
SBOC NRR
CBQ NO

ENTR 2
LTER NO
ROUT 10
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 2
DMI 0
FCI 0
FSNI 0
SBOC NRR
CBQ NO

ISET 3
NALT 5
MFRL 1
OVLL 0

Dial 9,1905686aaaa

result: call processes out rt 10

.trac 0 2444 dev

ACTIVE VTN 096 0 01 06

ORIG VTN 096 0 01 06 KEY 0 MCR MARP CUST 0 DN 2444 TYPE 2002P2
MEDIA ENDPOINT IP: 192.168.100.247 PORT: 5200
TERM TN 055 23 IPMG 000 1 V PHYSICAL TN 000 1 00 18 COT RMBR 100 46 OUTG
OING TRUNK CALL
VGW TN 000 1 00 18
MEDIA ENDPOINT IP: 192.168.200.12 PORT: 5236
MEDIA PROFILE: CODEC G.711 MU-LAW PAYLOAD 20 ms VAD OFF
DIAL DN 905686aaaa
MAIN_PM DIAL AUX_PM COMPLETE
TALKSLOT ORIG 7 TERM 7 JUNCTOR ORIG0 TERM0
QUEU NONE
CALL ID 100 12922

COS_ORIG CTD COS_TER UNR
TGAR_ORIG 1 TGAR_TER 0
NCOS_ORIG 1 NCOS_TER 0
EXP_ROUTE NO

AUX NARS
DIAL DN 91905686aaaa
NARS_PM OUTPULSE
RL_IND 19 RL_ENT 0
DG_MAN 30 FCA INDEX 2 TOD 0 <-- correct entry


---- ISDN PRA CALL (TERM) ----
CALL REF # = 47
BEARER CAP = VOICE
HLC =
CALL STATE = 4 DELIVERY
CALLING NO = 416XXXYYYY NUM_PLAN:E164 TON:NATIONAL ESN:NPA
CALLED NO = 905686aaaa NUM_PLAN:E164 TON:NATIONAL ESN:NPA
PDCA 1 PAD 0 6 PCML MU MU

IDLE VTN 096 0 01 06 MARP

Dial 9,1905335bbbb

result: call fails -- fast busy

.trac 0 2444 dev

ACTIVE VTN 096 0 01 06

ORIG VTN 096 0 01 06 KEY 0 MCR MARP CUST 0 DN 2444 TYPE 2002P2
MEDIA ENDPOINT IP: 192.168.100.247 PORT: 5200
TERM NONE
DIAL DN 91905335bbbb
MAIN_PM DIAL AUX_PM NARS_CALL
TALKSLOT NONE
QUEU NONE
CALL ID 100 12921

COS_ORIG CTD COS_TER UNR
TGAR_ORIG 1 TGAR_TER 0
NCOS_ORIG 1 NCOS_TER NONE
EXP_ROUTE NO

AUX NARS
DIAL DN 91905335bbbb
NARS_PM EOD_QUED
RL_IND 19 RL_ENT 3
DG_MAN 32 FCA INDEX 73 <-- where did this come from??



IDLE VTN 096 0 01 06 MARP

 

[a12ozbottle]

So your local 1905686 is working? Now your 1905 ld is not?
The last part says its looking at entry 3 on rli 19. Is there an entry 3?

 

[MagnaRGP]

Test 2. Expected outcomes.

Chg MFRL to 2 on RLI 19

Dial 9,1905686aaaa

result: authcode prompt (I don't want this authcode prompt). Expected due to MFRL change. Enter authcode, call processes out rt 10 as local call.

.trac 0 2444 dev

ACTIVE VTN 096 0 01 06

ORIG VTN 096 0 01 06 KEY 0 MCR MARP CUST 0 DN 2444 TYPE 2002P2
MEDIA ENDPOINT IP: 192.168.100.247 PORT: 5200
TERM TN 055 23 IPMG 000 1 V PHYSICAL TN 000 1 00 28 COT RMBR 100 46 OUTG
OING TRUNK CALL
VGW TN 000 1 00 28
MEDIA ENDPOINT IP: 192.168.200.12 PORT: 5256
MEDIA PROFILE: CODEC G.711 MU-LAW PAYLOAD 20 ms VAD OFF
DIAL DN 905686aaaa
MAIN_PM DIAL AUX_PM COMPLETE
TALKSLOT ORIG 8 TERM 8 JUNCTOR ORIG0 TERM0
QUEU NONE
CALL ID 100 12891

COS_ORIG CTD COS_TER UNR
TGAR_ORIG 1 TGAR_TER 0
NCOS_ORIG 3 NCOS_TER 0
EXP_ROUTE NO

AUX NARS
DIAL DN 91905686aaaa
NARS_PM OUTPULSE
RL_IND 19 RL_ENT 0
DG_MAN 30 FCA INDEX 2 TOD 0


---- ISDN PRA CALL (TERM) ----
CALL REF # = 47
BEARER CAP = VOICE
HLC =
CALL STATE = 4 DELIVERY
CALLING NO = 416XXXYYYY NUM_PLAN:E164 TON:NATIONAL ESN:NPA
CALLED NO = 905686aaaa NUM_PLAN:E164 TON:NATIONAL ESN:NPA
PDCA 1 PAD 0 6 PCML MU MU

IDLE VTN 096 0 01 06 MARP


Dial 9,1905335bbbb

result: authcode prompt (I DO want this authcode prompt). Enter authcode, call processes out rt 9 as LD.

.trac 0 2444 dev

ACTIVE VTN 096 0 01 06

ORIG VTN 096 0 01 06 KEY 0 MCR MARP CUST 0 DN 2444 TYPE 2002P2
MEDIA ENDPOINT IP: 192.168.100.247 PORT: 5200
TERM TN 085 22 IPMG 004 1 V PHYSICAL TN 004 1 00 00 COT RMBR 99 22 OUTGO
ING TRUNK CALL
VGW TN 004 1 00 00
MEDIA ENDPOINT IP: 192.168.100.204 PORT: 5200
MEDIA PROFILE: CODEC G.711 MU-LAW PAYLOAD 20 ms VAD OFF
DIAL DN 91905335bbbb
MAIN_PM DIAL AUX_PM COMPLETE
TALKSLOT ORIG 5 TERM 5 JUNCTOR ORIG0 TERM0
QUEU NONE
CALL ID 100 12887

COS_ORIG CTD COS_TER UNR
TGAR_ORIG 1 TGAR_TER 0
NCOS_ORIG 3 NCOS_TER 0
EXP_ROUTE NO

AUX NARS
DIAL DN 91905335bbbb
NARS_PM OUTPULSE
RL_IND 19 RL_ENT 1
DG_MAN 0 FCA INDEX 0 TOD 0


---- ISDN PRA CALL (TERM) ----
CALL REF # = 22
BEARER CAP = VOICE
HLC =
CALL STATE = 4 DELIVERY
CALLING NO = 416XXXYYYY NUM_PLAN:E164 TON:NATIONAL ESN:NPA
CALLED NO = 1905335bbbb NUM_PLAN:E164 TON:NATIONAL ESN:NPA
PDCA 1 PAD 0 6 PCML MU MU

 

[a12ozbottle]

Print your esn in ld 86, and rdb for route 9 and post.

 

[a12ozbottle]

If you want the authcode prompt for everything but 1904686 then you are going to have to break the numbers down farther with spns and send the locals to a different rli than the LD.

 

[MagnaRGP]

REQ prt
CUST 0
FEAT esn

MXLC 25
MXSD 511
MXIX 10
MXDM 255
MXRL 255
MXFC 250
MXFS 0
MXSC 200
NCDP 4
AC1 9
AC2
DLTN YES
ERWT NO
TODS 0 00 00 23 59
RTCL DIS
NCOS 0 - 0
NCOS 1 - 0
NCOS 2 - 0
NCOS 3 - 0
NCOS 4 - 0
NCOS 5 - 0
NCOS 6 - 0
NCOS 7 - 0
NCOS 8 - 0
NCOS 9 - 0
NCOS 10 - 0
NCOS 11 - 0
NCOS 12 - 0
NCOS 13 - 0
NCOS 14 - 0
NCOS 15 - 0
NCOS 16 - 0
NCOS 17 - 0
NCOS 18 - 0
NCOS 19 - 0
NCOS 20 - 0
NCOS 21 - 0
NCOS 22 - 0
NCOS 23 - 0
NCOS 24 - 0
NCOS 25 - 0
NCOS 26 - 0
NCOS 27 - 0
NCOS 28 - 0
NCOS 29 - 0
NCOS 30 - 0
NCOS 31 - 0
NCOS 32 - 0
NCOS 33 - 0
NCOS 34 - 0
NCOS 35 - 0
NCOS 36 - 0
NCOS 37 - 0
NCOS 38 - 0
NCOS 39 - 0
NCOS 40 - 0
NCOS 41 - 0
NCOS 42 - 0
NCOS 43 - 0
NCOS 44 - 0
NCOS 45 - 0
NCOS 46 - 0
NCOS 47 - 0
NCOS 48 - 0
NCOS 49 - 0
NCOS 50 - 0
NCOS 51 - 0
NCOS 52 - 0
NCOS 53 - 0
NCOS 54 - 0
NCOS 55 - 0
NCOS 56 - 0
NCOS 57 - 0
NCOS 58 - 0
NCOS 59 - 0
NCOS 60 - 0
NCOS 61 - 0
NCOS 62 - 0
NCOS 63 - 0
NCOS 64 - 0
NCOS 65 - 0
NCOS 66 - 0
NCOS 67 - 0
NCOS 68 - 0
NCOS 69 - 0
NCOS 70 - 0
NCOS 71 - 0
NCOS 72 - 0
NCOS 73 - 0
NCOS 74 - 0
NCOS 75 - 0
NCOS 76 - 0
NCOS 77 - 0
NCOS 78 - 0
NCOS 79 - 0
NCOS 80 - 0
NCOS 81 - 0
NCOS 82 - 0
NCOS 83 - 0
NCOS 84 - 0
NCOS 85 - 0
NCOS 86 - 0
NCOS 87 - 0
NCOS 88 - 0
NCOS 89 - 0
NCOS 90 - 0
NCOS 91 - 0
NCOS 92 - 0
NCOS 93 - 0
NCOS 94 - 0
NCOS 95 - 0
NCOS 96 - 0
NCOS 97 - 0
NCOS 98 - 0
NCOS 99 - 0
ETOD
TGAR NO

ROUT 9
DES BELG_COT_SVRT
TKTP COT
NPID_TBL_NUM 0
PRIV NO
SAT NO
RCLS EXT
VTRK NO
NODE
DTRK YES
BRIP NO
DGTP PRI
ISDN YES
MODE PRA
IFC D100
SBN NO
PNI 00001
NCNA NO
NCRD NO
ISAR YES
RTN 99
MIN 0


PAGE 004

MAX 20
NCOS 0
IEC ???
CPUB OFF
DAPC NO
BCOT 0
DSEL VOD
PTYP PRI
AUTO NO
DCDR NO
ICOG OGT
RANX NO
SRCH LIN
STEP
ACOD 7109
TCPP NO
TARG
CLEN 1
OABS
TIMR ICF 512
OGF 512
EOD 13952
NRD 10112
DDL 70
OOD 1
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3
CRD 512
NBS 2048
NBL 4096
TFD 0
LEXT 100
CDR YES
INC YES
LAST NO
QREC NO
OAL YES
AIA NO
OAN YES
OPD NO
CDRX NO
NATL YES
MUS YES
MRT 40
EQAR NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
TDET NO
TTBL 0
ATAN NO
PLEV 2
MCTS NO
ALRM NO


PAGE 005

ART 0
SGRP 0
ARDN NO
AACR NO

Here is the FCAS allow table, just so you can see WHY I don't want to go into SPNs:

FCI 2 <-- LD to rt 9, local to rt 10

NPA 905
ALOW 200 201 202 203 204 205 209 222 223 224
231 237 239 248 250 258 264 265 266 284
292 294 299 300 303 305 307 313 316 326
350 370 391 395 398 400 406 408 409 413
415 417 418 420 421 422 423 424 426 427
428 470 471 472 474 475 477 479 480 482
489 490 492 503 504 505 506 508 513 514
530 532 533 534 539 550 552 553 554 558
583 584 585 586 587 588 590 591 597 604
605 619 621 622 626 640 642 649 652 653
660 663 669 683 686 691 693 695 699 702
703 706 707 709 713 717 724 726 727 729
731 737 738 739 744 747 748 749 750 751
752 754 757 758 760 761 762 763 764 767
770 771 773 780 784 787 794 801 805 831
832 833 837 838 839 841 843 850 851 852
854 856 857 859 860 862 864 873 875 876
877 878 879 880 881 882 883 884 886 887
888 889 893 900 903 904 907 909 910 913
915 917 918 927 936 939 940 943 944 946
947 948 951 968 969 995 996 998 999

NPA 289
ALOW 200 202 221 224 229 233 234 268 314 315
317 318 333 344 371 372 380 388 394 422
428 429 466 467 468 469 471 472 473 474
475 570 571 572 573 574 577 578 581 582
583 584 585 586 587 588 589 590 612 620
622 624 627 630 631 632 637 640 641 642
648 651 800 802 806 807 809 818 833 839
878 882 884 890 891 892 894 899

The hext phase is going to bring in a new site in 514/450 so that would make my SPN list utterly unmanageable!

Anyway, I've been thinking about this....with the MFRL of RLI 19 set to 2, the end user is prompted for an authcode. Then, if facilities exist, the call processes as free in entry 0. This is the outcome that I am looking for, but not the "optics" that the customer is looking for. They want to be prompted for authcode only when the call will cost. Do you think that I am assuming that the system has a functionality that is not available?

 

[bigindian65]

Can you not just use Expensive Route Warning Tone to let them know it cost to ride...

Mato' Was'aka

 

[MagnaRGP]

Good thought, but that won't fly. EWT wouldn't PREVENT the call, only tell the end user that their call to their spouse to pick up milk on the way home is costing someone else $$$.

This customer would not tolerate that. They don't want to have to chase/punish someone after the fact....

 

[a12ozbottle]

If you want it to prompt for and access code I dont know any other way, there is only 1 mfrl prompt per rli. You could have them dial a ffc then auth code first if they know it is long distance and not use the mfrl.

 

[a12ozbottle]

Otherwise its just going to be alot of typing for you.

 

[MagnaRGP]

That's kinda the realization I was coming too.

Stars for all for trying to help.

Thanks.