Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

So anyone try 3.1.65 yet?

Status
Not open for further replies.

phantomiii

Programmer
Mar 8, 2006
76
US
Anyone big issues anyone run into yet? Is this a stable release that hasn't broke anything we were used to?
 
i had a problem that wouldnt allow for IP phones to outpulse DTMF across the network back to VMPro. downgrading fixed it and i also spent a few hours with Avaya trying to fix it first, needless to say no luck with that.
 
is this across a WAN or SCN? Or just a internal network to VMPRO
 
post selection issue .
once connected to an external number who needs to select a option trough dialling a number doesn't work with ip phones
 
We are upgrading a 3 site scn today containg a 412 and (2) 406v2's. Ill post here tomorrow how everything goes. Im a little nervous about the issue with IP sets not outpulsing DTMF. I have 40 or more IP sets at 2 of the locations. Im tired of being avaya's beta testers on a GA release. I hope they get this stuff fixed one day. All I ask is for one good software release that is stable for our customers. Is that to much to ask for? (Can u tell Im frustrated) :-(
 
DTMF.....don't use LCR, that's a problem. We have a couple of site where the ip phone cannot outpulse DTMF. We removed the LCR today and moved the shortcodes to the general shortcode list and that fixed it......This was one 3.1.56 but also on 3.1.65.

Arnoud
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top