I have many clients whom we SNMP trap monitor and all works well. The last to jobs where we installed 3.2.55 and 5.0.5 on IPO406V2 and IPO412 will not work.
I know the settings are fine and the SNMP server at our office is working but nothing. Is there a way to test this with software to be sure ports UDP 161/162 are open on the customer network?
Any other ideas please let me know?
I know the settings are fine and the SNMP server at our office is working but nothing. Is there a way to test this with software to be sure ports UDP 161/162 are open on the customer network?
Any other ideas please let me know?