SNMP to the sets? Challenged by Avaya 1

[NARSBARS]

This is the same question asked in the BCM forum, but I am asking it for Succession 3.0 and 5.0. Are the sets, any VoIP model, with 3.0 or 5.0 software, SNMP capable? I am being put up against Avaya sets that are directly addressable though a MIB Browser.

Are those tough enough? I hope not because I need the help.

If this one is too easy, can anyone tell me where the NTP time settings are in Succession 3.0, if they exist?
I am an end user, not a vendor.

Thanks

NARSBARS

 

[MagnaRGP]

NTP settings for CS1k only came out (finally) with Rel. 5.0.

Don't know about the sets though. I don't think so.

 

[NARSBARS]

MagnaRGP,
Thanks, with a star, for your help with two questions. I thought this was the fact about NTP settings and with your verification I am good to go.

Now to work on the SNMP.


NARSBARS

 

[kirchenlo]

What do you would like SNMP to do?

If you need to have the CS1K sending SNMP Traps and the Applicatiosn they cna do it. There is a MIB available for all these stuff and you can implement into your favorite NMS.

 

[NARSBARS]

I would like to be able to browse directly to the set.

The main reason is because my outfit is split between Nortel 30% and Avaya 70% and I may be fighting for a career.

Our upper management tends to retire to jobs with the Avaya vendor and they are always looking for ways to replace Nortel.

NARSBARS