Trying to set up SNMP on a Option 11 3.0. I had the instructions,but not sure it pertains to 3.0. I can't get past the (set enable_traps on). Get sch099. Any help would be appreciated. Thanks
> set open_alarm 0 10.38.1.64
=> prt open_alarm
Open Alarm destination #0 is 10.38.1.64
=> ping 10.38.1.64
PING 10.38.1.64 SUCCESSFUL
=> set enable_traps on
SCH0099 ENABLE_TRAPS?
=> set enable_traps on
SCH0099 ENABLE_TRAPS?
=>
TIM000 14:15 2/7/2013 CPU 0
> set open_alarm 0 10.38.1.64
=> prt open_alarm
Open Alarm destination #0 is 10.38.1.64
=> ping 10.38.1.64
PING 10.38.1.64 SUCCESSFUL
=> set enable_traps on
SCH0099 ENABLE_TRAPS?
=> set enable_traps on
SCH0099 ENABLE_TRAPS?
=>
TIM000 14:15 2/7/2013 CPU 0