Jan 17, 2013 #1 JDConnors IS-IT--Management Nov 1, 2012 14 US We are trying to collect information from the network on our actual phones. Are we able to get SNMP information from each device or just from the main pbx?
We are trying to collect information from the network on our actual phones. Are we able to get SNMP information from each device or just from the main pbx?
Jan 17, 2013 #2 tlpeter Programmer Dec 5, 2005 27,844 NL You should be able to do the phones too. There are MIB's for this on the admin CD BAZINGA! I'm not insane, my mother had me tested! Upvote 0 Downvote
You should be able to do the phones too. There are MIB's for this on the admin CD BAZINGA! I'm not insane, my mother had me tested!
Jan 17, 2013 #3 BWB8771 Technical User Dec 28, 2012 124 US JD - I'd love it if you'd post back here with information on what you might've found useful in polling the phones! IP 500 8.1(63) VMPro 8.1.9016 46/5610s, 46/5621+25s Upvote 0 Downvote
JD - I'd love it if you'd post back here with information on what you might've found useful in polling the phones! IP 500 8.1(63) VMPro 8.1.9016 46/5610s, 46/5621+25s
Jan 17, 2013 #4 papapoon Technical User Jan 17, 2012 41 CA What if your polling your network using spiceworks, what SNMP Community would we use?? Is public the default community? Can we change the community from the 1608 Phone configuration files??? Upvote 0 Downvote
What if your polling your network using spiceworks, what SNMP Community would we use?? Is public the default community? Can we change the community from the 1608 Phone configuration files???
Jan 21, 2013 #5 fonedoc Vendor Jun 14, 2001 139 US SNMP can be set up by modifying the 46xxsettings.txt file. Fonedoc Upvote 0 Downvote
Feb 1, 2013 Thread starter #6 JDConnors IS-IT--Management Nov 1, 2012 14 US Fonedoc, We need to poll each phone, this will allow that? Upvote 0 Downvote