TwistedAdmin
IS-IT--Management
I have a customer that has a Panasonic DP-3030 that has recently requested the Scan-to-Email feature be configured. The machine has the capability of generating and sending email on it's own with the proper SMTP configuration information (smtp server name, smtp auth name, password). The only hitch is that it does so on port 25 with no provision for port changes (nor the ability to insert a colon and a different port number at the end of the smtp server IP address).
Typically, this is a no-brainer setup. However, this particular client has a residential account with Comcast and has previously had port 25 blocked. A lot of Googling has been done to find a work-around for this but to date has not yielded success, including a call to Comcast and a request for the lifting of the block (30 minutes of my life I'll never get back).
I am presently playing with PostCast and have tried using DynDNS's MailHop service (which was unsuccessful).
So, any of you run into this situation or know of a work-around for it?
Thanks & Regards
[ A+ Certified, Net+ Certified ]
"Old men are always young enough to learn."
~ Aeschylus
Typically, this is a no-brainer setup. However, this particular client has a residential account with Comcast and has previously had port 25 blocked. A lot of Googling has been done to find a work-around for this but to date has not yielded success, including a call to Comcast and a request for the lifting of the block (30 minutes of my life I'll never get back).
I am presently playing with PostCast and have tried using DynDNS's MailHop service (which was unsuccessful).
So, any of you run into this situation or know of a work-around for it?
Thanks & Regards
[ A+ Certified, Net+ Certified ]
"Old men are always young enough to learn."
~ Aeschylus