Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SMDR-station to station recording

Status
Not open for further replies.

fondog

IS-IT--Management
Dec 28, 2005
34
US
We have a call accounting system (CallWhere) and a Prologix G3si v11 and need to record station to staion calls on all DID numbers. I have checked the CDR set up and we are set up to record expanded on the primary output. Is there something I am missing or does the G3si not record this type of data. There is a note in our CallWhere Admin Bookl that advises not all PBX's pass this information. Any help is appreciated.
 
Hi,

on "change system-parameters cdr" form enable option "intra-switch CDR", then after entering "change intra-switch-cdr" you can fill the extension you wish to appear in the accounting system.

regards,
SzuperK
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top