Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SMDR in 2400 format does not have CR & LF

Status
Not open for further replies.

KenNECIVSIPS

Technical User
Aug 23, 2002
29
US
I use a serial port logger to pull SMDR records into SQL. Unfortunately, I can only pull records when the IVS2 or IPX is set to output in 1400 format. The reason is that in 2400 format, it does not append a CR or CR/LF to the end of a record.

Does anyone know how to force a CR or CR/LF to the end of SMDR record data for 2400 format data?

I can no longer use 1400 format, since the call start time does not have seconds on it. ARGH~!

Thanks a lot!
 
Try command D001>6>1 execute "Number of line feeds after printing" Then busy out the APOO and unbusy it.
 
I had tried that, but no luck. I got a different seriald data logger, that has flow control (Advanced Serial Data Logger, and that seems to work.

Thanks anyway.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top