SMDR for MICS 4.1

[Jolagues]

Does anyone know the path to turn on SMDR on a MICS version 4.1 Once in programing mode?


José

Please let me know if this was helpful

 

[jerryreeve]

I am assuming you have the SMDR-6 module and have it connected to one of your station ports.

Feature 9 * 2
Select Next
at Printer:
Select Change to change the output from 1200 to 2400,4800,9600,19200,38400,57600,or115200
or Select Next
At Format:
Select change to change the output from SL-1 to Norstar format
Or select Next
At Reoprts:
Select Change to change from All to Outgoing, Accounts, Or Long Distance.
Or select Next
At Language:
Select Change to change from English to french
Or select Next
At Access Codes:
Selcet Show to show Long distance carrier account codes that will be suppressed when reporting long distance calls.
Or select Next
At Feature #:
Note the feature code that would be used to identify a call with an account number.
Or select quit
My Printer is 8N1 and I don't see a place to change it in programming.
the report formats are basic for SL-1 either in the normal mode or CLID mode and fairly verbose inthe Norstar mode.
If this dosen't give you what you want let us know and we'll try to get you more. JerryReeve
Communications Systems Int'l
com-sys.com

 

[Jolagues]

Thank you that was very helpful José

Please let me know if this was helpful

 

[Jolagues]

I tried it and it says this feature is not enabled do you knoe where I would go to enable it?

José

Please let me know if this was helpful

 

[jsaad]

make sure the SMDR6 is plugged into a working station port. test it with a phone, then un plug and put the smdr6 on the port.

Give it a minute or two and try again.

jm

http://www.tgscorp.com

 

[jerryreeve]

Going back to my first assumption, do you have the module and have it connected to a station port? JerryReeve
Communications Systems Int'l
com-sys.com

 

[ty0004]

won't copying the older phones work?

 

[Jolagues]

jsaad thank you that worked .

José

Please let me know if this was helpful