Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SM Trust Management Failed

Status
Not open for further replies.

num025

Technical User
Sep 8, 2008
195
Guys, we've been trying to hook up 2 new DL360 servers for an SMGR-SM setup, however everytime we execute the "initTM" command we would be getting an error and the trust mangement would fail:

BlwAa.jpg


From what we understand this would be required first before configuring SMGR, as of the moment the 2 servers can ping and see each other through a dedicated test network. Please do inform us if we are missing anything that may lead to this failure, thanks!
 
Forgot to mention that we have verified our enrollment password to be valid and is similar to what we enter during initTM.
 
Just an update, we've erroneously tried to install a 6.2 version of SM on a 6.1 kickstarted machine, so when we tried installing a 6.1 SP7 SM ISO it went fine until we came up with this error:

Code:
error: Failed dependencies:
        libnetsnmp.so.10 is needed by OpenIPMI-2.0.16-7.el5.i386
        libnetsnmp.so.10 is needed by hp-snmp-agents-8.5.0.17-19.i386
        libnetsnmpagent.so.10 is needed by hp-snmp-agents-8.5.0.17-19.i386
        libnetsnmphelpers.so.10 is needed by hp-snmp-agents-8.5.0.17-19.i386
        libnetsnmpmibs.so.10 is needed by hp-snmp-agents-8.5.0.17-19.i386
Install failed due to missing dependencies.

Do we really need to install an SP-less version of 6.1 first before proceeding with SP7 or is there some other way that is preventing this from completing successfully?
 
Just an update, we finally succeeded installing the SM from scratch using a 6.1.6 version of the ISO. Trust management now finishes fine however we are now having problems with the replication:

Code:
Mon Sep 10 15:10:33 PHT 2012: Trust Management Initialization started.
Mon Sep 10 15:10:34 PHT 2012: Trust Management Initialization of SIP A/S started.
Mon Sep 10 15:10:53 PHT 2012: Trust Management Initialization of SIP A/S completed.
Mon Sep 10 15:10:53 PHT 2012: Trust Management Initialization of Session Manager 

started.
Session Manager trust already established, skipping
Mon Sep 10 15:10:53 PHT 2012: Trust Management Initialization completed successfully.
Stopping all components
..............................................................................
Mon Sep 10 15:12:17 PHT 2012: Register replica node with System Manager DRS master 

started.
Sending configurations to master node
MBeanException occurred while invoking operation :: NotifyXML
ERROR # 1 : Unable to perform Aggregation, Terminating the 

configuration...................
Starting all components
.
Mon Sep 10 15:12:19 PHT 2012: Register replica node with System Manager DRS master 

failed.

Pinging both-ways using the corresponding FQDNs of the other was okay and from what we understand (correct us if we're wrong) was that we need to have this completed before even configuring SMGR itself. Are we missing something? Any other areas to look for clues on this error?
 
We had also problems with the replication. For the installation of the SMGR we used the CDs which were delivered from Avaya. This SMGR was not compatible with our preinstelled SM.
After the first install and the reinstall the problem could not be resolved.
We downloaded newer veresions and everything was ok.

We have:
SM SP7 (6.1.7.0.617012)
And:
VSP 6.0.3.9.3
SMGR 6.1.5.0 / SP8 1960

Good luck
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top