Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SLPRER Errors

Status
Not open for further replies.

Roelof53

Technical User
Jan 25, 2008
11
ZA
Hi
I have 2 PRI links that is connected to my service provider in south Africa TELKOM. My d channels keeps on dropping and when I had a look on the PRI-cards for errors I get a lot of SLPREP errors what is SLPREP errors and what can cause this.

>ld 60

SL-1 --- SYS-12/AXE-10 SWE/NUMERIS/SWISS/TCNZ
/EUROISDN/SING/THAI/MSIA/INDO/CHNA
/INDI/PHLP
CHANNEL TIMESLOT MAPPING

DTI000
.
SL-1 NETWORK TIMESLOT
B-CHANNEL 1 -15 1 -15 1 -15
16-30 17-31 17-31
D-CHANNEL 31 16 16
lcnt


PRI2 TRK LOOP 11
MNT NNDC NNC OOS
BPV- 000 000 000 000
FAP- 000 000 000 000
SLP- 007 000 000 007
CRC- 000 000 000 000
G2 - 000 000 000 000
MAINT NONEWCALL UNAVAIL SEVERE
TOTAL 24HR BPV - 000000000 000000000 000000000 000000000
TOTAL 24HR CRC - 000000000 000000000 000000000 000000000
TOTAL 24HR FAP - 000000000 000000000 000000000 000000000
TOTAL 24HR SLPREP - 000000213
TOTAL 24HR SLPDEL - 000000000
TOTAL 24 HOUR G2 AIS -000000008
TOTAL 24 HOUR G2 LFAS -000000000
TOTAL 24 HOUR G2 LMAS -000000000
TOTAL 24 HOUR G2 RAI -000000000
TOTAL 24 HOUR G2 LOS -000000000
TOTAL 24 HOUR G2 RAIE -000000000

PRI2 TRK LOOP 12
MNT NNDC NNC OOS
BPV- 000 000 000 000
FAP- 000 000 000 000
SLP- 008 000 000 007
CRC- 000 000 000 000
G2 - 000 000 000 000
MAINT NONEWCALL UNAVAIL SEVERE
TOTAL 24HR BPV - 000000000 000000000 000000000 000000000
TOTAL 24HR CRC - 000000000 000000000 000000000 000000000
TOTAL 24HR FAP - 000000000 000000000 000000000 000000000
TOTAL 24HR SLPREP - 000000213
TOTAL 24HR SLPDEL - 000000000
TOTAL 24 HOUR G2 AIS -000000008
TOTAL 24 HOUR G2 LFAS -000000000
TOTAL 24 HOUR G2 LMAS -000000000
TOTAL 24 HOUR G2 RAI -000000000
TOTAL 24 HOUR G2 LOS -000000000
TOTAL 24 HOUR G2 RAIE -000000000

PRI2 TRK LOOP 14
MNT NNDC NNC OOS
BPV- 000 000 000 000
FAP- 000 000 000 000
SLP- 000 000 000 000
CRC- 000 000 000 000
G2 - 000 000 000 000
MAINT NONEWCALL UNAVAIL SEVERE
TOTAL 24HR BPV - 000000000 000000000 000000000 000000000
TOTAL 24HR CRC - 000000000 000000000 000000000 000000000
TOTAL 24HR FAP - 000000000 000000000 000000000 000000000
TOTAL 24HR SLPREP - 000000000
TOTAL 24HR SLPDEL - 000000000
TOTAL 24 HOUR G2 AIS -000000000
TOTAL 24 HOUR G2 LFAS -000000000
TOTAL 24 HOUR G2 LMAS -000000000
TOTAL 24 HOUR G2 RAI -000000000
TOTAL 24 HOUR G2 LOS -000000000
TOTAL 24 HOUR G2 RAIE -000000000
 
Take a look at your clocking.
Ld 60
ssck 0/1
If your running in freerun, you need to make a change.
 
Hi Thanks

I have 2 PRi cards and the one is locked and the other one is free run. I still think it is a Telkom issue on their side but I need to proove it. any other suggestions???

ld 60

SL-1 --- SYS-12/AXE-10 SWE/NUMERIS/SWISS/TCNZ
/EUROISDN/SING/THAI/MSIA/INDO/CHNA
/INDI/PHLP
CHANNEL TIMESLOT MAPPING

DTI000
.
SL-1 NETWORK TIMESLOT
B-CHANNEL 1 -15 1 -15 1 -15
16-30 17-31 17-31
D-CHANNEL 31 16 16
ssck 0/1


.


DTI000
.ssck 1

ENBL
CLOCK ACTIVE
CLOCK CONTROLLER - FREE RUN
PREF - 11
SREF - 12
AUTO SWREF CLK - ENBL
IP DB PORT 2 DSBL
MEDIA GATEWAY CLK SRC: CC
.ssck 0

DSBL

IP DB PORT 1 LOCKED
IP DB PORT 2 DSBL
IP DB PORT 3 DSBL
IP DB PORT 4 DSBL
CALL SERVER CLK SRC: IP DB
 
Your active clock is in FREE RUN. You need to enter the command in LD 60:

.TRCK PCK

Then do an RCNT to reset the error counters and monitor them.



War Eagle!
Lions Baseball '09!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top