Slow validation config process

[johnromani]

Hi there,

When I create around 900 incoming call routes, the system becomes very slow at the validation process. Even I turn off the validation and leave it only when I save config, this process continues slow. If I erase all incoming routes, the system becomes normally again.

Is it a bug from all versions of IPO system?

I got it on versions 5.0.x, 6.0.x and 6.1.x.

From Manager, at version 7, 8 and 9 I got it.

Cesar Romani
ACS Certified | Comptia Convergence ++ Certified

 

[tlpeter]

You need to use less ICR's

You can use 1234567E (E is for extension number) or 1234567XXX


BAZINGA!

I'm not insane, my mother had me tested!

 

[johnromani]

Even when I use DID?



Cesar Romani
ACS Certified | Comptia Convergence ++ Certified

 

[amriddle01]

Yes, look in the Help files in Incoming call route at the characters you can enter for wildcards etc, there is rarely a need for that many Incoming call routes

ACSS (SME)
APSS (SME)

http://www.ipoffice.tel

"I'm just off to Hartlepool to buy some exploding trousers

 

[johnromani]

Ok guys!

I got it... I can use for example 5505XXXX and in destination I use # to match.

I'll try it.

Cesar Romani
ACS Certified | Comptia Convergence ++ Certified

 

[tlpeter]

You should only need that one and exceptions on this one.

BAZINGA!

I'm not insane, my mother had me tested!