Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

slow server performance

Status
Not open for further replies.

foz67

Technical User
Nov 18, 2002
9
CA
Hi there...

I've upgraded a few old servers to new P4 Dell and Touch Servers. Both brands were operating slower than the previous servers using the same applications.

The only difference was that I'm utilizing RAID 1 now, but now I'm on a MUCH faster server.
The Dell server turned out to be slow because of the amirdmon. Disabling that solved that problem.

BUT the Touch servers aren't using that monitor. The raid controller is the Infortrend IFT-2101UB Raid controller. I can't find out how to disable it's monitor or to even find out if that's causing the slowdown on those servers as well.

We're running SCO osr5.0.6 Enterprise with all patches applied.
Looking over the sar results hasn't helped me to find the problem.

ANY help would be much appreciated.

Thanks,
Don

 
Hi ,

You have access to the Controller Setup ? , if you controller can use its owns cache configure that one.

I hope this can help !!!
 
Thanks JorGeVal,

I'll see if I can. This server is offsite, so I'll do some searching to see if I can do this remotely or not.

Thanks again for your input.
Greatly appreciated!

Don
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top