SL1100 change dial tone for SIP Trunk ?

[Bignose_2]

Hi,

SL1100
Is there a way to change the dial tone for a Sip trunk once pressed 9 for outside line.
Is is exactly the same as the tone as when first lifted handset for internal etc.

The ISDN trunk has a very different from the tone once pressed 9.
more of a brrrrr

I have looked at Service tones 80-01-02
but trunk dial I would have thought applied to both anyway,

I tried changing 2nd unit but no change.

did 2nd initization

Thanks I/A

 

[belevedere]

The only options are for internal VS. trunk dial tones system wide.

 

[Bignose_2]

OK, thanks

So the brrrrr for the ISDN trunk must be at the providers end i.e. BT.
& the continuous tone for the SIP trunk must be from the Sip trunk provider. i.e. Sipgate.

I guess perhaps change the internal dial tone to something very different from the two others.
Fine for ISDN trunk as currently very different from internal but the current Sip trunk is exactly the same tone as the the internal.

Thanks again.