Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SKYPE SIP LINE

Status
Not open for further replies.

Avayell

IS-IT--Management
Mar 18, 2008
134
GR
Hi to all,

I am trying to set up SKYPE sip line for a customer.
Does anyone have a sample configuration for that?
Nor Skype, nor Avaya has anything about it.

Thanks in advance,
 
I did it last week.
The only downside was that you needed to dail the country code too.
Which ipo and which software version?



When you pay peanuts, you get monkeys!

I'm not insane, my mother had me tested!
 
I tried it on 6.1.5 and this is how i did it:

ITSP Domain name: sip.skype.com
ITSP Proxy address: 78.141.179.70
Network topology: None
IPRoute:
78.141.179.0
255.255.255.0
ipaddress of your router
Lan1 or 2 (depends on which one you use)

Local URI: Use credential user name
Contact: Use credential user name
Display name: Use credential user name
PAI: None

Compression mode: G.711
Re-invite: Checked
Preferred codec: Checked


Credential need to be put in and then select Registration on the SIP URI tab.

This should work on 6.1.5


When you pay peanuts, you get monkeys!

I'm not insane, my mother had me tested!
 
Thanks for the answers

ipo 500 4.2

is it too old?
 
Yes i think it won't work.

When you pay peanuts, you get monkeys!

I'm not insane, my mother had me tested!
 
I have had it working on 6.1 and 7.0 but only with international number being dialed.


When you pay peanuts, you get monkeys!

I'm not insane, my mother had me tested!
 
I did not know that there is a 7 release.
 
Have a look at SkypeToPhone.


I've tried it with a trial license and works ok. A touch on the slow side but the server I used was well under speced!!!

Jamie Green

Football is not a matter of life and death-It is far more important!!!!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top