Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Skype for business via MiCollab

Status
Not open for further replies.

kwbMitel

Technical User
Oct 11, 2005
11,504
CA
So, I have to get one of these going.

Anyone have any tips?

Current software on all systems as of Jan 31, 2017 - Micollab, MCD, MBG

**********************************************
What's most important is that you realise ... There is no spoon.
 
are you talking about the plugin ?

if so then here goes

if the user already has the full client installed , uninstall it.
make sure the skype client is installed and updated
use this url for the plugin ( where 10.103.16.7 is the micollab server Ip (or use the fqdn)

Install it using the FQDN ( same as you would a micollab client)

start up lync , this should bring up the plugin

In the lync config under phones - set the work phone to be the users ext

the lync client should have a menu option to make a voice call ( only works if the work phone has been set)
- or you can use the dialling box ( same as for micollab)

you should get a call handling pop ( same as for micollab) but only for mitel calls ( not skype calls)

Its ok as phone control but there are no dynamic status , I think you can do DND and Fwds

If I never did anything I'd never done before , I'd never do anything.....
 
Very nice summary

Even a path to the msi!

Exactly what I was hoping for. Stars pending upon completion

**********************************************
What's most important is that you realise ... There is no spoon.
 
haven't done it for a while , was called lync the last time ,but I think the basic ideas are all still relevant

If I never did anything I'd never done before , I'd never do anything.....

 
You also need to apply the "Desktop SDK" licence against the MiCollab user. Should be a free part number
 
Ah yes good spotting , I forgot about that
should be
54005953 Skype for Business Plug-in 1 User
54005954 Skype for Business Plug-in 100 Users






If I never did anything I'd never done before , I'd never do anything.....

 
I believe I have 50 skype licenses and 50 UCC licenses

This gives me 100 desktop licenses on the micollab server

**********************************************
What's most important is that you realise ... There is no spoon.
 
The MSI is in the same location as the standard MSI for UCA

More specifically

sftp://[server ip or fqdn]/usr/ucs/dl

**********************************************
What's most important is that you realise ... There is no spoon.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top