Site-toSite Pix 7.x to 6.3

[jps3700]

Hello:

I recently installed a PIX running 7.x software and I am unable to get a IPSEC site-to-site vpn to work to another office which has a PIX running 6.x software. I was wondering if anyone else had these issues or any recommendations.

Thanks,

 

[mustaine737]

We have a similar setup here and it works fine. What exactly seems to be the issue?

Any configs/debugs?

 

[jps3700]

I am getting debug output from the PIX running 6.3, but nothing from the 7.1 PIX.

IPSEC(key_engine): request timer fired: count = 2,
(identity) local= x.x.100.2, remote= x.x.130.241,
local_proxy= x.x.120.1/255.255.255.255/0/0 (type=1),
remote_proxy= x.x.110.131/255.255.255.255/0/0 (type=1)
IPSEC(key_engine): request timer fired: count = 1,
(identity) local= x.x.100.2, remote= x.x.130.241,
local_proxy= x.x.115.1/255.255.255.255/0/0 (type=1),
remote_proxy= x.x.110.238/255.255.255.255/0/0 (type=1)

 

[mustaine737]

That unfortunately doesn't tell much.

Can you provide details - intended setup, config, etc.?