Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SIPSI TN8412AP NOT TALKING TO MY S8400

Status
Not open for further replies.

Element73

Technical User
May 31, 2005
20
CA
As far as I know everything is config right.

It my 1ST 8400 and SIPSI and the SIPSI will not talk .
It keeps telling me no board inserted
Can anybody help
 
Are the cards in the correct slots ? What type of cabinet are you using and where did you put the cards ?
 
It's G650 the SIPSI is in slot o1a and the 8400 is in 02a.
 
Put the S8400 in slot 01a02 and connect it to the SIPI with a crossover cable... This config works, I have done 2-3 of them...

Petran.
 
Make sure you also have the bus terminators on the G650 as well or this won't work. i found that out the hard way as well.
-Wes
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top