Sip 1

[blauwegent]

Can some one tell how i configure a sip line

 

[tlpeter]

it all depends on wich provider
there isn't a how to
where are you from ?
there are some examples on this page

good luck


ACA - Implement IP Office
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!

 

[blauwegent]

i am from belgium and i want to connect the ipo with a other pbx(aastra) with a SIP line but i don't now where i set what in the program maybe there is some one who hase a backup from a sip configuration

thx

 

[jonny505050]

You need full access and extensive knowlegde of your customers firewall, Network and site to site connectivity OH don't forget IP office sip configuration. Avaya have put there own mark on the world of SIP.

 

[blauwegent]

I still have one problem and thats when I make a call to the other pbx its stil working but when the other pbx call to my IPO the line is not coming in,the two pbx are just for intern use and tests not with a provider,the other one is a Nexspan (aastra) i still have a trace hier so maby some one can see the problem.
thx


1562780mS SIP Trunk: 9:Rx
ACK sip:351@192.168.6.235:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.6.222:5060;branch=z9hG4bK30948817;rport
From: Pascal Dect 889 <sip:****@192.168.6.222:5060>;tag=70019C5E
To: <sip:351@192.168.6.235:5060>;tag=0d1c258ff6e1aa20
Call-ID: 0201FFFF8FFE63A1
CSeq: 1 ACK
Contact: <sip:****@192.168.6.222:5060>
Server: PABX R4.2
Max-Forwards: 70
P-Behind-Gsi: 192.168.6.222
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE
Content-Length: 0

 

[jamie77]

I'm not sure if the IPO will like <sip:****@192.168.6.222:5060> I think it would like 351@192.168.6.22:5060 better.

A few of us here have also found that the incoming SIP URI has to be programmed into the SIP trunk setup form for it to work otherwise it doesn't recognise the number.

Jamie Green

ACA:Implement - IP Office
ACS:Implement - IP Office

http://www.alliedcom.co.uk

Fooball is not a matter of life and death-It is far more important!!!!

 

[PlatinumGuy]

You can also set it under the user, if it doesnt find a mtach in the line URI it "SHOULD" look to user sip tabs to find a match there.

How is your originating system set up to send those **** ?

ACA - IP Office Implement
ACS - IP Office Implement
ACE - IP Office Implement
ACI - IP Office Implement

 

[blauwegent]

thanks all off you it still works now i set it under user sip and now the lines come in