Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SIP trunks via SPS between BCM and CS1Ke5.5

Status
Not open for further replies.

jacob83

Technical User
May 6, 2011
28
US
Hello,
I am trying to setting up a SIP trunks between BCM50 releas 4 and CS1ke release 5.5 using SPS(Linux NRS 5.5),
BCM phones can call CS1ke phones but not the opposite , my configuration is quite simple and it should work but I receive an error"Ntwk unavailable" in DCH traces , and in BCM trace shows the phone is alerting but pysically is not ,,
any body did this integration before please help by document or any recommendation???


 
which ip address configured in bcm gateway settings...node or ss?
 
the node IP address of course, Thank you anyway , the problem solved , the firewall was blocking the SIP ports 5060

Regards,
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top