SIP trunks via SPS between BCM and CS1Ke5.5

[jacob83]

Hello,
I am trying to setting up a SIP trunks between BCM50 releas 4 and CS1ke release 5.5 using SPS(Linux NRS 5.5),
BCM phones can call CS1ke phones but not the opposite , my configuration is quite simple and it should work but I receive an error"Ntwk unavailable" in DCH traces , and in BCM trace shows the phone is alerting but pysically is not ,,
any body did this integration before please help by document or any recommendation???

 

[alberto111]

which ip address configured in bcm gateway settings...node or ss?

 

[jacob83]

the node IP address of course, Thank you anyway , the problem solved , the firewall was blocking the SIP ports 5060

Regards,