Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sip trunks not working on hyper v editions

Status
Not open for further replies.

Voip-Nerd

Technical User
Apr 6, 2011
13
SA
Hi
we have a customer with IPO server edition -Hyper v. But we can't make the sip trunks working. If we connect IPO physical unit and connect the sip with it, It's working fine.
Anyone had successfully made the IPO server edition on Hyper-v Working with sip trunks.

BR
 
Hi Derfloh
many thanks for your reply

just to clarify, you mean to set the sip trunk in the IPO server edition without using the IP500 physical unit.
BR
Ala'a
 
Yes. What I mean is that IP500 just needs the licenses while you have to configure the number of SIP channels at the system config as well. That's why I think it works with IP500 but not on your server edition.

IP Office remote service Fixed price SIP trunk configuration: CLI based cale blocking: SCN fallback over PSTN:
 
Although it could be something else as cant make the sip trunks working is not the most helpful of statements.

Does the SIP trunk show as idle, what happens when you try and make a call, what happens when you try and send a call in, what does monitor and SSA show etc, etc, etc.

| ACSS SME |
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top