Has anyone ever configured SIP trunks from bandwidth.com. I have downloaded the knowledgebase article but im still a little unclear on how to configure this. On page 6 of the doc it mentions:
Public IP Address: This requires that a public IP address be dedicated to the Mitel 3300 and made known to Bandwidth.com to deliver SIP Trunking service. Make sure your Mitel 3300 has a dedicated WAN port before attempting this configuration.
But I dont see anywhere where you can setup the MXe wan port for SIP settings. Has anyone ever had to config the WAN port on the mxe for SIP trunks?
Public IP Address: This requires that a public IP address be dedicated to the Mitel 3300 and made known to Bandwidth.com to deliver SIP Trunking service. Make sure your Mitel 3300 has a dedicated WAN port before attempting this configuration.
But I dont see anywhere where you can setup the MXe wan port for SIP settings. Has anyone ever had to config the WAN port on the mxe for SIP trunks?
