I'm wondering if anyone installed a BCM 400 or BCM 50 R2 with sip trunks and what were the results. The documentation only mentions the sip trunks as networks between 2 BCM or a BCM & CS1000, nothing mention about sip trunks from a Sip provider to the BCM and even if its pssible.Any feedback will be appreciated, Thanks in advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Sip trunks and BCM
- Thread starter techman63
- Start date
exVoIP
Programmer
- Sep 4, 2007
- 12
- 0
- 0
I wouldn't try SIP from a BCM to a non-Nortel endpoint until BCM 50 Release 3. The main reason is DTMF transmission from the BCM accross the SIP trunk.
A large effort was made in R3 to test and resolve interoperability issues with some major US carriers.
In M50 R3 there should be no DTMF transport issues as RFC2833 will be supported.
A large effort was made in R3 to test and resolve interoperability issues with some major US carriers.
In M50 R3 there should be no DTMF transport issues as RFC2833 will be supported.
- Status
Similar threads
