SIP Trunking on Mitel 3300

[steveycarr]

Hi,
Can anyone point me in the right direction to configure BT SIP Trunks on Mitel 3300 MCD4.1, and should the connection to the Internet be through the WAN Port or through a LAN Port.. I cant find anything documented on MOL, although almost every other Service Provider is accounted for.

Thanks in advance

Steve

!ExtraDunce

 

[Supernova99]

There has not been a BT SIP interop performed. So it maybe a trial and error setup.

You should be able use either ports it just depends on where your SIP trunks are presented.
If you are using a dedicated data link then use the WAN port if you have an existing data link via a router then use the LAN

Share what you know - Learn what you don't

 

[Supernova99]

Just found this if you are using a BT 2Wire ADSL modem

Share what you know - Learn what you don't

 

[steveycarr]

Hi,

Thanks for the link, I'll give it a try and report back

Steve

!ExtraDunce