SIP TRUNK vs Broadsoft

[siki85]

Hi mates,

I'm having issues with SIP TRUNK against Broadsoft. Here is my info
PEER DETAILS

PEER DETAILS

host=sip.domain.com
username=XXXXXXX
secret=YYYYYY
type=peer
qualify=yes
insecure=very
fromuser=XXXXXXX
fromdomain=sip.domain.com
dtmfmode=rfc2833
disallow=all
context=from-trunk
allow=ulaw&alaw
trustrpid=no
sendrpid=no
canreinvite=no

REGISTER
XXXXXXX:YYYYYY@sip.domain.com/XXXXXXX

But for some reason, Asterisk is not sending the requests to Broadsoft (if I use the domain for the host parameter). Instead, if I change the IP in the host, Asterisk sends the requests but the trunk does not register.

Any help would be appreciated.

 

[busster]

Peer Details:

disallow=all
allow=all
dtmfmode=rfc2833
canreinvite=no
insecure=very
context=from-trunk
host=hostdomain or ip
username=<Authentication username associated with SIP trunk>
secret=<Authentication username password>
type=peer

Registration:
usernameassword@host/username

additionally if using NAT, make sure these settings are correct and router is set up correctly as well.

Clowns to the left of me, jokers to the right, here I am, stuck in the middle with you.

 

[siki85]

Hi busster,

I tried what you recommended, but I can't see the IP address for the SIP request messages.

any other idea ?

CCNA, SECURITY+

 

[busster]

I assume you are NAT?

Have you configured these settings?

Clowns to the left of me, jokers to the right, here I am, stuck in the middle with you.