SIP trunk KNP (dutch) 1

[stevea2Z]

Anyone has configured a KPN SIP trunk on an IP Office? X-lite seems to work fine. Outgoing calls one-way speech and no incoming. By incoming calls I don´t see anything on the Monitor.
Thanks for clues on this one

 

[intrigrant]

No incoming data is a firewall or ip routing problem, no audio is a firewall or ip routing problem.
Without any details it is not possible to give any usefull answers.

 

[tlpeter]

I think that KPN needs to configure the IP address of the IPO as the destination.


BAZINGA!

I'm not insane, my mother had me tested!

 

[stevea2Z]

OK the trunk is one from routIT ??
I have now a registered trunk, but I can only reach the main number. 31733036400.
If I dial the main number 31733036400 I reach extension 6400. so far so good

If I try to reach the other numbers,like 31733036418 the call is still going to 6400, it won´t go to 6418?

Anyone can help me out, pretty new to this provider

 

[joe2938]

You do have the incoming call routes built correct?

 

[stevea2Z]

Hi Joe,

In the monitor and System Status I see the numbers offered as 31733036400 so I have created these as incoming.
0 31733036400 any voice 6400
0 31733036418 any voice 6418
I have tried with X-lite and the numbers are going through, so it must be something on the IPO

 

[joe2938]

From what I can see it looks like incoming sip line group id is set to 0, is that correct?

 

[stevea2Z]

Yes group ID is 0

 

[stevea2Z]

I´m not sure if I´m correct, but in the monitor it routes the call to the contact information and not to the "TO" info

 

[stevea2Z]

Solved, changed SIP advanced from Request URI into TO Header. Now all calls are routed correctly.
Hopefully this hasn´t changed anything on outgoing calls, but that´s something for tomorrow morning
Thx

 

[joe2938]

Pink for posting outcome!