SIP trunk configuration required

[AbdulRashid]

I have got OpenScape 4000 V8 and it LAN information is as follow.

Customer LAN

Node 1 192.168.104.231
Node 2 192.168.104.232
Portal 192.168.104.233
Assistant 192.168.104.235
CSTA 192.168.104.236
Default Router 192.168.104.254
Netmask 255.255.255.0
______________________________________


SIP Trunk provider Settings / IPs
---------------------------------


o Customer IP: 10.24.43.34
o IP POOL: 10.24.43.32/30
o Port: 5060
o Master Number: 38892328
o Channels: 2
o Signaling IP: 43.242.100.1
o Media IP: 43.242.100.2-4

Question is , the IPs pool of Openscape and , IP pool of "SIP trunk" provider are totally different. I can not ping SIP trunk provider IPs.
I have got free STMIX in PBX (Openscape 4000). should I connect SIP trunk directly in STMIX LAN port?
OR , our IT department should do some settings to ping SIP trunk provider IPs ?
Dear All, how can I configure this SIP trunk in my system,

I have carried out my all settings , for example BUEND , BCSU , BFDAT , CGWB ,GKREG , TDCSU , RICHT , LDAT, LDPLN,
but I can not dial and can not receive call.
Do I have to make , sip trunk profile ? if yes then how can I make ?
Please let me know what is left ?

 

[TADPU]

That is probably a tricky one… in the end you need to have a kind of networking connection between the public SIP Provider and your OS4K. This could be either a STMIX or a virtual HG on a SoftGate.
Regarding ping to the SIP Provider, either your IT Department blocks it via Firewalls or even the SIP Provider is not responding zo ping but only 5060. you will need to network trace that first e. g. Wireshark…

Then if networking is clear, then you can start with connecting OS4K.
In any case you need to activate a SIP Trunk Profile (best case there is a coresponding Provider Profile already) on the used gateway (STMIX or vHG) and the TDCSU PEN must be from that „board“.