SIP trunk between CUCM 7.1 and mitel 3300

[jf5801]

I have read through the PDF for this set up 3 times and i cannot get phones on either side of the PBXs to ring. the sip link us up, but when i call a cisco phone from a mitel phone, i get invalid number. I have routes set up...help

 

[Billz66]

More information is required
Software levels are always helpful

might help to detail what you have set for the ARS for calls to the Cisco
Sounds like you are sending something that it doesn't understand .

That could be because you are sending the wrong digits or they are rejecting what you are sending

If I never did anything I'd never done before , I'd never do anything.....

 

[LoopyLou]

Agree with Billz66 that we need more detail especially as it relates to the ARS programming to route calls from/to the 3300.

An apple a day keeps the doctor away. Anyone else and you need to throw it harder.

 

[jf5801]

thanks guys...My new Australian buddy solved my problem. I had the SIP trunk attributes set incorrectly on the Mitel side.