This is what I have. I'm more familiar with the CS1K, but bought this for some development.
Avaya Aura for Midsize Enterprise contains the following applications, installed on an Avaya provided hardware platform:
• Avaya Aura® Communication Manager 6.0.1
• Avaya Aura® Communication Manager Messaging 6.0.1
• Avaya Aura® Session Manager 6.1
• Avaya Aura® System Manager 6.1
• Avaya Aura® Application Enablement Services 6.1
• Presence Services 6.1
• Communication Manager Utility Services 6.1
w/ Avaya G430 gateway, T1/E1 Interface Module, and 1 Model 9611G/ 2 Model 9641G IP Telephones.
The original question was, of the three phones I received do they come standard with H323 and if SIP is required I must download the software? We'll be developing around both H323 and SIP.
They come on H323 firmware but can be set to SIP but then this firmware must be available on a HTTP server.
When you have an Aura CM then this will be the case.
As per my post before, the 9621G/9641G all ship pre-loaded with H.323 software. If you wnat to install SIP software on them, you need to download it from support.avaya.com.
jamie77,
I do appreciate the suggestion, but if I knew as much to put it in that forum, I wouldn't have been here asking for help. I'll keep that in mind next time though.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.