SIP headers Manipulation

[hadala]

Hello,

Is it possible to manipulate the SIP headers onto an IP Office 500?
Where I can found all source numbers options? In the knowledge database I see only 5 possibility!
For example :
SIP_USE_PAI_FOR_PRIVACY is not on the knowledge database under source numbers.

Thank you in advance

 

[kholladay]

It would be helpful to know what you are trying to do. Many of the undocumented source numbers are for specific customers or rare configurations.

The example you gave, for instance, using PAI for privacy would be the default if you were using PAI for your calling party information. However if you are using RPID for calling party but wanted to use PAI for privacy this is not the default behavior. It is also a very unique setup and I'd probably be more concerned about why the provider is doing this than how to work around it.

Kyle Holladay
ACSS & APSS SME Communications
MCP/MCTS Exchange 2007
Adtran ATSA, Aruba ACMA

"I have one speed, I have one gear...GO!!!" - Charlie Sheen

"Thinking is the hardest work there is, which is the probable reason why so few engage in it." - Henry Ford

 

[hadala]

Hello,

Thank you for your message.

This is what we want :
For the CLIR (Caller Line Identification Restriction) :
I want to send a SIP INVITE request with :
- In the FROM field : the DID number : example: From : « Anonymous » <sip :097301XXXX@sip.domain>
- In the contact field Contact : the caller ID : example: Contact : <sip :097301XXXX@sip.domain>
- Add a field Privacy : ID (OK)
- Add a field P-Asserted-Identity (NOK)
We did the treatement for blocking the callerID this way with our Dialogic gateways.

This is what I have for the moment:

For the CLIR (Caller Line Identification Restriction) :
In the SIP INVITE request:
- in the FROM field : From : « Anonymous » <sip:restricted@sip.domain>
- In the Contact field: Contact : <sip :anonymous@sip.domain>
- Privacy : id (OK)
- P-Asserted-Identity : « Unavailable » <sip :097301XXXX@media.gw>
(intead of Unavailable I want the number 097301XXXX.

I also have A problem with the CFU, that show me the Calle ID and not the Caller ID. If they are a way to put in the PAI the Caller ID.

Thank you in advance, and sorry for my english (I'm french)