Thanks. It looks like MoL is for resellers/partners only, and we're just the end user. So I'll contact my reseller.
Also wondering, we're running firmware 02.01.01.06 now, and want to change to SIP 8.x. Can we go directly to the SIP v8 firmware, or do we need to do multiple upgrades (v6 to v7 to v8)
The phone is now running Minet. The first step is to change the phone to SIP.
Reset the phone while holding the 5
Network Parameters? #(NO)
Hardware Config? #(NO)
Phone Mode? *(YES)
Protocol? *(YES)
Phone Mode:Minet *=Change *(YES)
Select 0 for SIP.
Looks like you will have to upgrade in several steps:
"If you are running Rel 3 software, you will need to upgrade to Rel 4 prior to going to 5.0.0.21. It is strongly recommended not to upgrade through the GUI. Only the Boot (Set) upgrade should be performed if your are running software lower than 6.0.0.19."
"IMPORTANT NOTE
If you are running Firmware on sets prior to 5.0.0.21, you MUST follow the instructions included in the 7.1 Release Notes. Failure to follow these steps will result in upgrade failure. "
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.