SIP client in hipath4000 v3

[mohamad.taj]

Hello
I work with the hipath4000 v3
Recently, I've encountered a problem adding SIP client.
Now, my question: is there a possibility to add a sip client to this pbx?

 

[donb01]

Is your Hipath 4000 set up to support SIP? Someone will slap me if I'm wrong, but I thought SIP didn't really start taking off in that arena until maybe V4 or V5. You would need to have a STMI board that is set up to provide SIP extensions, and have available SIP ports to assign to the phone. Do you have other SIP things that are already working, or is this your first attempt?


Don Bruechert, Voice Comm Analyst II
CareTech Solutions @ Holy Family Memorial
Manitowoc, WI, USA

 

[mohamad.taj]

hello
thanks a lot for reply
I've tried to config my STMI with a client sip-compatible function block
  But the result was that with the first setup, 30 licenses were used. And after that, I was able to add 29 other subscribers as subsets. Of course, the problem was not just licensing. The second problem was that all the subscribers that were added were displayed when calling the output of the header number.