SIP/ Call forwarding

[HELPATECH]

Have a 5.0 IPO is NSS supported yet so i could transfer caller id it displays only sip number from the sip extension..

it works on pri but not the sip why?
i am missing something has anyone have it working
need help thanks tried everything and caller id doesnt display on the cell p[hone only extension DID

any help thanks

 

[Bas1234]

You could try .SS

SS - Pass Through Calling Number
Pass through the Calling Party Number. For example, to provide the incoming ICLID at the far end of a VoIP connection, a short code ? with telephone number .SS should be added to the IP line

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[HELPATECH]

okay
so let me see if i understand it correctly

under_system shortcode
code 8N
Feature .SS
Line 17
or
under the sip tab XXXXXXXXXX.SS

 

[Bas1234]

Just .SS no XX's in the Feat.

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[HELPATECH]

.SS, didnt work any more suggestions!

 

[janni78]

I'm a bit confused about exactly what you're trying to do.

Can you descibe the call senario?

"Trying is the first step to failure..." - Homer

 

[HELPATECH]

call comes in and rings the desk phone than if no answer it forwards to cell, it only display the caller DID # not the from caller id
like on a pri you could program a shortcode
code 8N
feat NSS
line 0

it will display the caller id on the cell phone

but on SIP it doesnt

 

[janni78]

Have you tried changing the "Send Caller ID" setting under the SIP line.

That's supposed to do the trick but haven't given it a go yet.

"Trying is the first step to failure..." - Homer