Hello
I have a Linux Computer (PC A) and 2 NT Computers (PC B+C).
Additionally i have a 56k modem installed and configured Samba on Linux and all Computers are connected well in the network.
PC A: IP 192.168.0.3 Subnetmask 255.255.255.0 (Routing PC)
(IP-Forwarding = Yes)
PC B: IP 192.168.0.5 Subnetmask 255.255.255.0
PC C: IP 192.168.0.6 Subnetmask 255.255.255.0
Now i want use PC A as router and configured 'route.conf' as:
192.168.0.5 192.168.0.3 255.255.255.255 eth0
192.168.0.6 192.168.0.3 255.255.255.255 eth0
default 192.168.0.3 255.255.255.255 eth0
Connections from PC A to Internet could be estabilished but from B and C not, what do i wrong in this config file ?
I have a Linux Computer (PC A) and 2 NT Computers (PC B+C).
Additionally i have a 56k modem installed and configured Samba on Linux and all Computers are connected well in the network.
PC A: IP 192.168.0.3 Subnetmask 255.255.255.0 (Routing PC)
(IP-Forwarding = Yes)
PC B: IP 192.168.0.5 Subnetmask 255.255.255.0
PC C: IP 192.168.0.6 Subnetmask 255.255.255.0
Now i want use PC A as router and configured 'route.conf' as:
192.168.0.5 192.168.0.3 255.255.255.255 eth0
192.168.0.6 192.168.0.3 255.255.255.255 eth0
default 192.168.0.3 255.255.255.255 eth0
Connections from PC A to Internet could be estabilished but from B and C not, what do i wrong in this config file ?