Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
silent intrusion on BC10
- Thread starter bolivar
- Start date
gcdhnjgfhfgsxh
Technical User
Hi
Check ASPAP 100 from memory this should be set to 3 for silent intrusion, this isint documented in ALEX or dynatext, no idea why however it does apear in bc11 &12 documentation
Regards
Dave
Check ASPAP 100 from memory this should be set to 3 for silent intrusion, this isint documented in ALEX or dynatext, no idea why however it does apear in bc11 &12 documentation
Regards
Dave
Hi,
of course, this isn't documented for BC9 & BC10, because then this ASPAP was introduced with correction ( ! But in BC11 and later versions.
of course, this isn't documented for BC9 & BC10, because then this ASPAP was introduced with correction ( ! But in BC11 and later versions.
- Thread starter
- #5
- Status
Similar threads
- Question
