Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

silent conference BC9

Status
Not open for further replies.
frescolana

frescolana

MIS
Apr 21, 2006
5
IT

Hi guys,
sorry for my question, I'm looking for the patch to made silent conference in BC9 (without tone).
Can somebody help me? please

I know maybe this question has been already done, but I didn't found anything

thanks, very much
 
Sort by date Sort by votes

have you tried changing aspac 100 already?

best parnum
 
Upvote 0 Downvote
parnum, aspac 100 is not available in BC9, is only availabe from BC11.
you really need a patch.

please send the result of this command:

CNPIP:UNIT=MPP;

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
Upvote 0 Downvote
thank you whosrdaddy and parnum
I will give you the print value shortly
 
Upvote 0 Downvote
Hello whosrdaddy,
this is the printout that you have asked
thanks

CNPIP:UNIT=MPP;

PROGRAM UNIT INFORMATION
PU-NAME PU-NO PRODUCT NUMBER REV PATCH
MPP H'306 2/CAA 111 8682/151 R3A YES
TYPE
B'0000 0000 0000 0000 0011 0011 1000 0000
TYPEEXT
B'0000 0000 0000 0000 1010 0000 1010 1010
LOADED IN LIM
1
 
Upvote 0 Downvote
ok,
you'll have to load these 2 patches.
Please be aware that you're doing this AT YOUR OWN RISK.
I or tek-tikps can not be held reponsible if this screws your system.

patch #1

Code: 
PCASI:UNIT=MPP,CI=S66676A,REV=2-R3A,IA=69A0,RA=69A6,BYTE=0;             
  MOVE.B ($172,A1),D5;                                                  
  BFTST D5{30:1};  ! CTYPEOFTONE = CNFTONEBARRED? !                     
  BEQ L0;                                                               
  CLR.B ($58,A6);       ! TTONE=NOTONE !                                
  JMP $20069EC;         ! MPTONE100 !                                   
L0:MOVE.B ($13B,A1),D4; ! OLD CODE !                                    
  BEQ L1;                                                               
  JMP $20069B8;                                                         
L1:;                                                                    
  END;                                                                  
!A;                                                                     
PCASI:UNIT=MPP,CI=S66676A,REV=2-R3A,IA=69CE,RA=69D4,BYTE=0;             
  MOVE.B ($172,A1),D5;                                                  
  BFTST D5{29:1};  ! CTYPEOFTONE=INTTONEBARED? !                        
  BEQ L0;                                                               
  CLR.B ($58,A6);         ! TTONE=NOTONE !                              
  JMP $20069EC;           ! MPTONE100 !                                 
L0:TST.B ($13A,A1);       ! OLD CODE !                                  
  BEQ L1;                                                               
  JMP $20069DC;                                                         
L1:END;                                                                 
!A;                                                                     
/* NEW ENTRY - >SETAPSPARVAL> */                                        
PCASI:UNIT=MPP,CI=S66676A,REV=2-R3A,SIGNO=00D2,RA=39AE;                 
  TRAPT.W #$213;                                                        
  MOVE.B  (A5)+,($70,A6);  ! TAHSPTR !                                  
  MOVE.B  (A5)+,($71,A6);  ! TAHSADCTRL !                               
  MOVE.W  (A5)+,($72,A6);  ! TAHSUNIT !                                 
  MOVE.W  (A5)+,($74,A6);  ! TPARNUM !                                  
  MOVE.W  (A5)+,($76,A6);  ! TPARVAL !                                  
  CMPI.W #$0064,($74,A6);                                               
  BNE L0;                                                               
  MOVE.W ($76,A6),D2;                                                   
  MOVE.B ($172,A1),D3;                                                  
  BFINS D2,D3{29:2};                                                    
  LEA ($0172,A1),A2;       ! CTYPEOFTONE = TPARVAL !                    
  TRAPT.L #$00020340;      ! QSCSV !                                    
L0:TRAPT.W #$12;           ! SEND CHGEXC !                              
  MOVE.B ($70,A6),(A5)+;   ! TAHSPTR !                                  
  MOVE.B ($71,A6),(A5)+;   ! TAHSADRCTRL !                              
  MOVE.W #$9F,D0;          ! SIGNO !                                    
  MOVE.W ($72,A6),D1;      ! TAHSUNIT !                                 
  MOVE.B ($1E,A0),D2;      ! CCOMMONLIM !                               
  TRAPT.W #$202;           ! QSSB !                                     
  END;                                                                  
!A;                                                                     
/* NEW ENTRY  - >FETAPSPARVAL> */                                       
PCASI:UNIT=MPP,CI=S66676A,REV=2-R3A,SIGNO=0089,RA=39AE;                 
  TRAPT.W #$213;                                                        
  MOVE.B  (A5)+,($70,A6);  ! TAHSPTR !                                  
  MOVE.B  (A5)+,($71,A6);  ! TAHSADCTRL !                               
  MOVE.W  (A5)+,($72,A6);  ! TAHSUNIT !                                 
  MOVE.W  (A5)+,($74,A6);  ! TPARNUM !                                  
  MOVE.B #01,($48,A6);     ! TRESULT = PARNUMNOTUSED !                  
  MOVE.W ($74,A6),D2;                                                   
  CMPI.W #$0064,D2;        ! APSCNFINTTONEOPTION !                      
  BNE L0;                                                               
  MOVE.B #00,($48,A6);     ! TRESULT = PARNUMUSED !                     
L0:TRAPT.W #$12;           ! SEND APSPARRES !                           
  MOVE.B ($70,A6),(A5)+;   ! TAHSPTR !                                  
  MOVE.B ($71,A6),(A5)+;   ! TAHSADCTRL !                               
  MOVE.B ($172,A1),D3;                                                  
  CLR.L  D4;                                                            
  BFEXTU D3{29:2},D4;      ! CTYPEOFTONE !                              
  MOVE.W D4,($76,A6);      ! TPARVAL !                                  
  MOVE.W ($76,A6),(A5)+;   ! CTYPEOFTONE !                              
  CLR.W (A5)+;             ! TMINPARVALUE !                             
  MOVE.W #3,(A5)+;         ! TMAXPARVALUE !                             
  MOVE.B ($48,A6),(A5)+;   ! TRESULT !                                  
  MOVE.W #$72,D0;          ! SIGNO !                                    
  MOVE.W ($72,A6),D1;      ! TAHSUNIT !                                 
  MOVE.B ($1E,A0),D2;      ! CCOMMONLIM !                               
  TRAPT.W #$202;           ! QSSB !                                     
  END;                                                                  
!A;                                                                     
PCACS:UNIT=MPP,CI=S66676A;                                              
Y;                                                                      
PCCOS:UNIT=MPP,CI=S66676A;                                              
Y;

patch #2
Code: 
PCASI:UNIT=MHHS3,CI=S66677A,REV=2-R4A,SECTOR=REL,ADDR=873,DATA=00&1D;
PCASI:UNIT=MHHS3,CI=S66677A,REV=2-R4A,SECTOR=REL,ADDR=876,DATA=FF&7F&01;
PCASI:UNIT=MHHS3,CI=S66677A,REV=2-R4A,SECTOR=REL,ADDR=170E,DATA=03&4D&50&50;
PCASI:UNIT=MHHS3,CI=S66677A,REV=2-R4A,SECTOR=REL,ADDR=1712,DATA=00;
PCASI:UNIT=MHHS3,CI=S66677A,REV=2-R4A,SECTOR=REL,ADDR=1716,DATA=03&06;
PCASI:UNIT=MHHS3,CI=S66677A,REV=2-R4A,SECTOR=REL,ADDR=1718,DATA=02;
PCACS:UNIT=MHHS3,CI=S66677A;
Y;
PCCOS:UNIT=MHHS3,CI=S66677A;
Y;

load patch #1, then patch #2
if there were no errors
do the command
SFCEI;
Y;

now you should have aspac 100:

/* CONFERENCE AND INTRUSION TONES PROVIDED = 00 (DEFAULT CASE) */
/* INTRUSION TONE ONLY = 01 */
/* CONFERENCE TONE ONLY = 02 */
/* NO CONFERENCE OR INTRUSION TONES = 03 */

change it to your needs.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
Upvote 0 Downvote
Thank you very much,
I will do!
Don't worry I will wate before make a dump to be sure

thank you again

I will tell you the result
 
Upvote 0 Downvote
Hi whosrdaddy,
it work perfectly....you are a great, the best technician of the world.
Thank you very very very much...
you have saved me

 
Upvote 0 Downvote
glad to hear it works frescolana!

[thumbsup]

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

bojo3871
  • Locked
  • Question
Silent Intrusion on MX where A&B doesn't know C is monitoring the call
Replies
2
Views
153
parnum
parnum
woolwich
  • Locked
  • Question
External conference not working
Replies
0
Views
82
woolwich
woolwich
Omissam
  • Locked
  • Question
Route Pattern MD110 BC9
Replies
8
Views
172
fcpli
fcpli
inlsp05
  • Locked
  • Question
limdisp for bc9
Replies
1
Views
97
vkrt
vkrt
ravin789
  • Locked
  • Question
conference on intrusion call
Replies
1
Views
98
parnum
parnum

Part and Inventory Search

Sponsor

Back
Top