Signalling Server Password

[terrysdavid]

I've set up a Signalling Server to act as a stand alone NRS. I've installed 4.50.88. Now I'm trying to log into the signalling server. I've used the default password

admin
cseadmin

But I'm not able to log into the signalling server from the console.

I can log into the NRS web server from the T-LAN using

admin
admin

Any suggestions?

 

[MagnaRGP]

Sig server is not a sig server if it is a stand alone NRS.

You can't launch element manager without a PBX, because that is not it's intended function.

 

[terrysdavid]

I'm not trying to launch element manager. I'm just trying to get into the signalling server using the console. I just managed to get in though. Thanks anyway.

 

[MrPederman]

Try the PBX login

 

[3tdp33ler]

Default psw for 4.50 standalone NRS is admin1/0000.
Dont forget to change it.
Regards.

 

[amitisgr8]

Hi,

In my system trunk is not realesed as customer disconnects the call, agents continue to listen the disconnect tone. I have changed the INC timers in DCH but problem is still same.

Plz Help

Thank in Advance

Amit

 

[MagnaRGP]

And this applies to the original queston how?

Please create your own thread, don't hijack someone else's.

Thanks.