mwpage2001
Technical User
How can I invoke the Install Menu on a CPPM Signaling Server, Rls 5.0?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Sig Server Install Menu
- Thread starter mwpage2001
- Start date
- Status
Jeffnortel
Vendor
Connect a laptop to the com port that should be attached to the amphenol or I/O panel. 9600N81
Test to be sure your able to see login prompt. Insert software flash card into slot in CPPM card. Press reboot button or reset card and watch for prompt to boot from faceplate. Type F
That sould do it.
Test to be sure your able to see login prompt. Insert software flash card into slot in CPPM card. Press reboot button or reset card and watch for prompt to boot from faceplate. Type F
That sould do it.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question