Siemens Hipath / Realitis DX SSH set up

[RDXMan]

Hi, Does anybody know how to set up the DX to allaow SSH connections.

I have version 13 of the software and this allows SSH connections, but how do you set it up.

Thanks

 

[thepfy]

I've used Telnet to the processor cards.
I would imagine that the file which needs amending on the DX is the Database.ini file as that holds the IP and MAC address details for the processor cards.
Not sure how you access to put them on if the processor cards haven't been put on the network (serial to cards?)

Our ISDX's like many others have gone to the scrapyard...

 

[Mitelmic]

Responding to an old thread for future reference -

Add the line "SECURITY=YES" to the system environment. Possibly came in at Version 9.

SMI A> SETENV

IPACT=19.0.21.185
IPSB=19.0.21.186
ETHACT=e:15:2f:0:14:d
ETHSB=e:15:2f:0:14:d
CIOIPACT=99.0.0.1
CIOISB=99.0.0.2
AUTO=1.0\BEE81001\SYSTEM.APP
ROUTE=19.0.0.0,19.0.10.2,H.255.255.252.0
CIL=2
CUST=3
REMOTE=4
SER1=300
SER2=300
SER3=300
SER4=300
SECURITY=YES
NIVAL=1.0/ni.dat
NUMDCHS=3

SECURITY=YES
Whether secure shell (SSH) working is enabled on the System card.
If this variable is not set, traditional FTP/Telent workign is enabled on the System card.
Format: YES or NO (null)

Note: Clear All entries in the LNIC table before changing the system environment.