Help! Our 150 Office Com went down We replaced power supply, computer etc. We had an extra one that came out of one of our old offices. Neither the old or the new machine will load. We just get 4 red leds on the computer card. What are we missing? What should we see for loading indicators?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Siemens Hicom 150 loading
- Thread starter omd
- Start date
Be patient, the system needs to load for 15 up to 20 minutes. Keep watching the first phone in the system.
If you have Dect/SLC card then it could take 30 min depending on the setup of the config.
___________________________________________
It works! Now if only I could remember what I did...
Dain Bramaged
___________________________________________
If you have Dect/SLC card then it could take 30 min depending on the setup of the config.
___________________________________________
It works! Now if only I could remember what I did...
Dain Bramaged
___________________________________________
- Status