Siemens DX Messenger Programming

[telecoman]

Hi there all,

I have here a Siemens DX Messenger card.
When I dial the Messenger via the hunt group or a port I receive the reply "Your call is being transferred to the operator".
I would like to change this to the message "Welcome to the Messenger System - please enter extension number followed by hash", which I believe is the default.
Despite looking at several electronic documents on the DX Messenger, I am unable to find clear information on how to do this!
Could anyone out there help please?
Regards to everyone,
Telecoman.

 

[happymal]

Never done it, but this is from the book....

Dial the messengers hunt group number
When the machine answers key 0 # “system administration prompt”
Enter the security code followed by # “menu options played”
Though it is not an option on the menu now press 9 “ a warning is now given
Programming options played.

----------------------------------------------------------


Changeing the Greeting on an auto-attendant


Log in
Key 3 for auto attendant
Choose auto attendant 1, 2, 3, or 4
Choose day or night menu
Key 6 to modify
Don’t make any changes, but exit by keying * #
Now you can record a new greeting/prompt key 1

Mal.

Latest Manuals:-

http://www.siemens-enterprisehipathdx.com/hipathdxeps7/